TOCHU TC-500 shot blasting machine is most suitable for removing of sand attached to the small, medium, and large castings, descaling of forgings, preparation of the steel or iron surface for rubber-Iining or galvanizing, etc. Both TC-500 are well known in local and -South-East Asia markets.

CHARACTERISTICS : TC-500

  • Since the workpiece is subject to projection as it is being agitated, even a complicated one can be blasted thoroughly.
  • The efficiency is excellent since the projection is performed from the adjustable throwing wheel unit.
  • After the blasting operation has been completed, the workpiece is discharged by reversing the direction of the rubber conveyor.
  • As far as the projection chamber is concerned, since a high wear-resisting rubber conveyor is used, its durability is excellent and workpieces are not flawed.
  • This machine is safe and simple to operate by means of push-button.
  • The inside surface of the projection chamber is covered with the lining made of special wearresisting steel, and the replacement can be easily done.

    • MAIN TECHNICAL SPECIFICATION

    		1. Wheel Blast
    2. Rubber Belt
    3. Bucket Elevator
    4. Abrasive Separator
    5. Bucket Loading
    6. Cyclone
    7. Dust Collector
    8. Control Panel

    		 Max Projection Capacity
    		 180 Kg./Min
    Cabinet (MM.)
    		 900X1,000
    Max Loading Weight
    		 500 Kg.
    Net Weight
    		 2,500 Kg.
    Electric Power
    		 - Wheel Blast 11 Kw X 4P
    - Bucket Elevator 1.5 Kw X 4P
    - Rubber Belt 1.5 Kw X 4P
    - Dust Collector 3.7 Kw X 2P
    - Lift Door 0.75 Kw X 4P
    - Loading Bucket 1.5 Kw X 4P
    - Shaking Motor 0.4 Kw X 4P
    DIMENSIONS
    		 A 4,300 MM.
    B 4,800 MM.
    C 4,300 MM.

    388 Moo6, Niyom-Klongsuan Road, Klongniyomyatra, Bangbo, Samutprakarn 10560 Thailand
    Tel. +66 (0) 2317-5381-8 Fax : +66 (0) 2317-5151, (0) 2317-5389 E-mail : fusak@tochu.co.th , kiti@tochu.co.th
    Design & Production by : Wonchat Studio